Solenso TOPCon solar panels

High power: Up to 505 W with an efficiency of 22.71 %.

Zero glare: Special glass keeping luminance below 10,000 cd/m².

Maximum safety: Ideal near airports, motorways and built-up areas.

Bifacial gain: Up to 30 % additional output from the rear face.

30-year warranty: Product protection and linear performance over three decades.

Low degradation: Only 0.4 % guaranteed annual loss.

High strength: Withstands 5400 Pa of snow and 2400 Pa of wind.

Architectural design: A Terra Cotta finish designed to blend into tiled roofs (BIPV).

Aesthetics without compromise: Combines the look of a traditional roof with the high performance of N-Type cells.

Stable power: Up to 390 W with an STC efficiency of 17.53 %.

30-year warranty: Product protection and linear performance guaranteed over three decades.

Ultra-low degradation: Only 0.4 % annual loss, holding 87.40 % after 30 years.

Bifacial technology: Additional output thanks to the rear face exposed to light.

Maximum strength: Certified to withstand 5400 Pa of snow and 2400 Pa of wind.

High power: Up to 505 W with an efficiency of up to 22.71 %.

Cutting Free technology: Minimises microcracks for better durability.

Mechanical strength: Positive loads of 5400 Pa and negative loads of 2400 Pa.

Reduced shading losses: Parallel circuit design that minimises power loss.

Low light performance: Optimised temperature coefficient for high yield.

PID resistance: Anti-PID test passed at 85 % relative humidity for 192 hours.

Bifacial module: Able to generate energy on the rear face, at no less than 80 % of the front face efficiency.

Quality assurance: Linear performance warranty over 30 years with a low annual degradation rate.

High power: Up to 615 W with an efficiency of 22.77 %.

Topcon technology: MBB half-cut cells for significant savings.

Mechanical strength: Positive loads of 5400 Pa and negative loads of 2400 Pa.

Reduced shading losses: Parallel circuit design that minimises power loss.

Low light performance: Optimised temperature coefficient for high yield.

PID resistance: Prevents potential induced degradation.

Bifacial efficiency: Up to 80 % bifaciality, for 30 % more energy than standard modules.

Quality assurance: Linear performance warranty over 30 years with a low annual degradation rate.

High power: Up to 715 W with an efficiency of 23.02 %.

Topcon technology: MBB half-cut cells for significant savings.

Mechanical strength: Positive loads of 5400 Pa and negative loads of 2400 Pa.

Reduced shading losses: Parallel circuit design that minimises power loss.

Low light performance: Optimised temperature coefficient for high yield.

PID resistance: Prevents potential induced degradation.

Bifacial efficiency: Up to 80 % bifaciality, for 30 % more energy than standard modules.

Quality assurance: Linear performance warranty over 30 years with a low annual degradation rate.

Versatile power: Up to 400 W of peak power, capturing solar energy efficiently.

Advanced technology: SuperMBB technology combined with HIT for increased energy generation.

Easy installation: Plug and play setup for straightforward commissioning and optimal portability.

Bifacial efficiency: Bifaciality above 90 %, increasing energy output by up to 20 %.

Assured quality: 10-year system warranty and 25-year linear power warranty on the solar module, with 15 years on the microinverter.

Adaptive design: Foldable module with an angle adjustable along the scale on the stand.